Genie Garage Door Opener Chain Glide Carriage 20432R

20432R

• Genie Chain Glide carriage for door openers with a standard rail assembly. 
• This item is currently not in production. 
• To replace this part purchase the 35263R Carriage Kit pictured below.

Genie Garage Door Opener Chain Glide Carriage Kit 35263R

35263R

$27.85

• Genie Chain Glide carriage replacement kit for door openers with a standard rail assembly. 
• Includes 20466R Carriage, 33677A Inner Slide, Master Link and Instructions.

Genie Garage Door Opener Chain Glide Carriage 20466R

20466R

NO LONGER AVAILABLE - USE 35263R ABOVE

• Genie Chain Glide Carriage
• Direct replacement for all Genie Chain Glide garage door openers with low profile rail assembly.  L series.

Genie Garage Door Opener Release Cord and Knob 21124A

21124A

$4.00

• Release Cord and Knob for all garage door openers
• Rope length cut for 7 foot high doors.

Genie Garage Door Opener Chain Glide Carriage Inner Slide 33677A

33677A

$11.50

• Genie Chain Glide Carriage Inner Slide.
• Direct replacement for all Genie Chain Glide door openers with low profile rail assembly.  L series.

Genie Garage Door Opener Chain Glide Carriage Inner Slide 33048A

33048A

NO LONGER AVAILABLE

• Genie Chain Glide Carriage Inner Slide.
• Direct replacement for Genie Chain Glide garage door openers with standard rail assembly.
• For repair use 35263R replacement carriage kit shown above.  Both the carriage and inner slide need to be replaced.

Genie Garage Door Opener Chain Glide Inner Slide 34516R

34516R

$10.50

• Genie Chain Glide Inner Slide.
• For Genie Chain Glide door openers- ML series ONLY
  Models 500ML - 700ML - 350ML

Genie Garage Door Opener Chain Glide Drive Gear 27096A

27096A

$11.75

• Drive gear for all Genie Chain Glide garage door openers.

Genie Garage Door Opener Chain Glide Worm 33355A

33355A

$10.25

• Worm for all Genie Chain Glide door openers.

Genie Garage Door Opener Chain Glide Gear Cover 20449R

20449R

$17.50

• Gear Cover for all Genie Chain Glide door openers.
• Lower gear cover assembly for all chain glide garage door opener models.

Genie Garage Door Opener Limit Switch 20113R

20113R

$11.45

• External limit switch.
• Direct replacement for Genie Chain Glide garage door openers with standard rail assembly.

Genie Garage Door Opener Limit Switch 20467R

20467R

$11.45

• External limit switch.
• Direct replacement for all Genie Chain Glide garage door openers with low profile rail assembly.  L series.

Genie Garage Door Opener Limit Lead 20417R

20417R

$5.95

• Genie limit lead.
• Grey. Up limit wire.

Genie Garage Door Opener Limit Lead 20418R

20418R

$6.95

• Genie limit lead.
• Brown. Down limit wire.

Genie Garage Door Opener Limit Switch 34538R

34538R

$14.75

• Up limit switch for Genie Chain Glide door openers- ML series ONLY
  Models 500ML - 700ML - 350ML

Genie Garage Door Opener Limit Switch 34538S

34538S

$14.75

• Down limit switch for Genie Chain Glide door openers- ML series ONLY
  Models 500ML - 700ML - 350ML

Genie Garage Door Opener Chain Glide Wire Clip 33762A

33762A

$0.50

• Wire clip for Genie Chain Glide and Overhead Door Python openers.
• Secures safety sensor wires and limit wires to top of rail.
• Recommend 6 per rail.

Genie Garage Door Opener Capacitor 18004B

18004B

$18.00

• Capacitor
• Part number found on capacitor.

Genie Garage Door Opener Capacitor 19988A

19988A

$18.00

• Capacitor
• Part number found on capacitor.

Genie Garage Door Opener Transformer 35426A

35426A

$24.00

• Transformer
• Part number found on transformer.
• Older part number 24412R

Genie Garage Door Opener Chain Glide Opto-Wheel 33356A

33356A

$4.00

• For use on Genie Chain Glide Models PCG400, 450L, 500ML, 600, 650L, 700ML, H2000C, GCG350, 350L and 350ML.

Genie Garage Door Opener Chain Glide Bushing and Washer Set 33223A/27089A

33223A

$4.50

• For use in Genie Chain Glide garage door openers.
• 1 bushing and 1 washer sold as a set.
• Used with the gear housing assembly.

Genie Garage Door Opener Chain Glide Bushing and Washer Set 33221A

33221A

$4.50

• For use in Genie Chain Glide garage door openers.
• 1 bushing and 2 washers sold as a set.
• Used with the worm gear assembly.

Genie Garage Door Opener Chain Glide Drive Shaft and Retainer Ring 33353A/24311B17

33353A

$9.50

• For use in all Genie Chain Glide garage door openers.

Genie Garage Door Opener Control Board (ICB)

• Control Board (ICB)
• Controls most functions of garage door opener.
• Must match part number.  The part number is found on the small white label in the sequensor/secoder (board).

click here for complete listing of available sequensors

Garage Door Opener Bracket 19792B

19792B

$6.50

• Door Bracket.

Garage Door Opener Header Bracket 35421A

35421A

$6.50

• Header Bracket.
• The part pictured on the left replaces the previous style (part number 22668A) pictured on the right.
• The part pictured on the left is the one that will be shipped.
• The Header Bracket pictured on the right has been discontinued and is NO LONGER AVAILABLE.

Genie Garage Door Opener Rail Strap 34540A

34540A

$5.00

• For Genie Excelerator, Overhead Door Overdrive, Genie Chain Glide, and Overhead Door Python models.
• Secures front end of rail to header bracket.

Genie Garage Door Opener Straight Arm 26012D

26012D

$8.50

• Genie garage door openers straight arm.

Genie Garage Door Opener Curved Arm 26013D

26013D

$8.50

• Genie garage door openers curved arm.

Genie Garage Door Opener Chain Glide Lens 33359A

33359A

$15.00

• Replacement lens for all Genie Chain Glide garage door opener models.

Garage Door Opener Heavy Duty Light Bulbs

GLB-4

$7.95

• Heavy Duty 60 watt bulbs.
• Vibration resistant. 2 per pack.

34322A Genie Garage Door Opener Light Socket

34322A

$8.50

• For garage door opener model numbers: CM 7600-IC, CM 8600-IC
  Pro 95, G-CL Series, IS Series, Pro 83/93, CM 7500/8500, SD Series, G Series, Pro 88, 98, 90, Pro 82, PCG 400, PCG 450, PG 600, PCG 650, GCCG 350, GCG 350L, PMX 700, GPS 700-IC, PMX 1200, GPS 1200-IC, PMLD 500, PMX 500-IC/B, PMX 300-IC/B, IC 250/B, PMX 60, 65, 70, 75, 80, 85, 300-IC, 500-IC, IC-250
• Older part number 26643A.

Genie Garage Door Opener Chain Glide 3-Piece Rail Assembly 20468R

20468R

$65.00

• For Genie Chain Glide Garage Door Door Openers models ending in L or ML. GCG 350L,  GCG 35ML.
• Low profile rail assembly.
• Rail sections ONLY. (Rail straps, hardware nuts & bolts NOT INCLUDED).

• **IMPORTANT**  THERE IS NO RETURN ON THIS ITEM.

Genie Garage Door Opener Chain Glide Rail Straps 33744A04

33744A04

$8.00 a pair

• Rail Straps for Genie Chain Glide Garage Door Openers.
• Used on 3-piece retail rail assemblies.
• Used to join rail sections together.
• Compatible with model numbers that have an "L" or "ML" in them.
• Sold in pairs (2).
• DOES NOT include nuts and bolts.
  

Genie Garage Door Opener Safe-T-Beam Kit

• Recommended for best repair approach.
• Includes everything needed; sensors, brackets, wire and fasteners.
• NOTE:  These safety sensors are compatible with all Genie door openers, EXCEPT those that used a 3-pin plug connector at the motor head and internal wiring at the sensors (sensors had to be taken apart to connect wiring). 
• If your garage door opener does not currently have sensors, this system will not work.
• Compatible with Overhead Door Code Dodger Brand Garage Door Openers.

Click Here For Safe-T-Beam Parts

CLICK HERE FOR TROUBLESHOOTING TIPS

Genie Garage Door Opener Chain Glide Wire Clip 33762A

33762A

$0.50

• Wire clip for Genie Chain Glide and Overhead Door Python openers.
• Secures safety sensor wires and limit wires to top of rail.
• Recommend 6 per rail.

Garage Butler Automatic Garage Door Closer

GarageButler

$59.95

Garage Door Butler complete details click here

• The Garage Butler is a device that will automatically close your garage door when you forget. You can NOW have peace of mind knowing that you NEVER have to worry about leaving it open ever again.