Genie Garage Door Opener Intellicode Two Button Remote Control Transmitter ACSCTG Type 2 GIT-2
ACSCTG Type 2 Genie Garage Door Opener Remote Control Transmitter is a 390MHz frequency using a rolling code technology programmed by a Learn Code button. This code changes every time you operate your garage door opener. This garage door opener remote can operate two Genie garage door operators. A maximum of 7 Transmitter, Wireless Keypad and other access device Codes can be stored in Receiver Memory.
Locate the Learn Code Button and Radio Signal Indicator on the Power Head Receiver of your Garage Door Operator. This can be found where you see the antenna wire hanging from the door opener motor head (you may have to take the lens cover off). If antenna wire is not hanging from garage door opener motor head then you have an external receiver which is a black box approx. 6" x 2" mounted close to your garage door opener motor or somewhere in the garage with a antenna wire hanging from it (pop off cover to find Learn Code Button).
If a Transmitter becomes lost or if you want to delete a Transmitter, Wireless Keypad or other access device ERASE ALL RECEIVER MEMORY. Press and HOLD the learn code button for 10 seconds or until radio signal indicator goes out. All garage door opener emote control transmitter are now erased from the receiver memory. Reprogram your garage door opener remote by following the link below.
CLICK HERE FOR COMPLETE CODING INSTRUCTIONS FOR PROGRAMMING YOUR
GARAGE DOOR OPENER REMOTE CONTROL
Programming instructions for your Homelink visor remote are found in your vehicles owner’s manual. You must follow the rolling code programming instructions exactly for things to work. If repeated attempts at programming fail, the device must be bad and needs to be replaced. We do not have a magic secret to make them work and really cannot provide any additional assistance than the factory instructions provide.
Our Products | Remote Controls |
Keyless Entry |
Repair Parts |
Accessories | Secoder Boards |
Wet/Dry Shop Vac Parts |
Coding Instructions |
About Us | Site Index
| Order by Phone |
imdoors.com- Owned by 1st Garage Door Openers, Inc., an independent family owned and operated business serving the Garage Door and Garage Door Opener Industry since 1981. Providing excellent customer service and assistance for over 25 years. We are a discount reseller of garage door opener remotes, repair parts, keyless entry and gate operator controls for your home, business, or gated community. We carry parts for the following garage door openers Lift-Master, Chamberlain, Sears Craftsman, Access Master, Sears Best Craftsman, Sears Automatic Door Opener, Master Mechanic, Security +, Formula 1, Garage Master, Billion Code, LiftMaster Professional, Estate Series, Premium Series, Contractor Series, Power Driver, Whisper Drive, Genie, Alliance, Norelco, Blue-Max, Lift-A-Door, Pro Max, Aladdin, Hercules, Stealth, Excelerator, Intellicode, Genie Pro, OverDrive, Python 2, Signature, Phantom, Legacy, Medallion, CodeDodger, Overhead Door, Genie Shop Vac, Stanley, Vemco, Quiet Glide, SecureCode, Lightmaker, Innovative Products, Whistler, U-Install, Popular Mechanics, Allister, Allstar, Pulsar, MVP, Challenger, GTO, All-O-Matic, Electrolift, Westinghouse, AM/11, Linear, Access Pro, Moore-O-Matic, MegaCode, Delta 3, MultiCode, Heddolf, ESP Micom, Intercontinental Dynamics, Crusader, Wayne Dalton, iDrive, Door Master, Quantum, Classic Drive, Tec Key, Martec, Monarch, Telectron and other garage door openers, and gate operators. Brand names of Garage Door openers are registered trade names of the respective entities and are only used for reference.
Copyright © 2013 All Rights Reserved. No part of this site can be reproduced in
any form or by any means, photocopying, electronic, mechanical, or otherwise,
without the prior written permission of 1st Garage Door Openers Inc.